Getting started
19
Transferring data from your previous device
(Smart Switch)
You can use Smart Switch to transfer data from your previous device to your new tablet.
Open
Settings
and tap
Accounts and backup
→
Bring data from old device
.
•
This feature may not be supported on some devices or computers.
•
Limitations apply. Visit
takes copyright seriously. Only transfer content that you own or have the right to
transfer.
Transferring data using a USB cable
You can connect your previous device to your new tablet with the USB cable to transfer
data.
1
Connect your new tablet and the previous device using your new tablet’s USB cable.
A USB connector may be needed depending on the previous device.
2
When the app selection pop-up window appears, tap
Smart Switch
→
Receive data
.
3
In the previous device, tap
OK
.
If you do not have the app, download it from
Galaxy Store
or
Play Store
.
Your new tablet will recognize the previous device and a list of data you can transfer
will appear.
4
On your new tablet, select an option you want, tap
Next
, and then follow the
on-screen instructions to transfer data.
Do not disconnect the USB cable from the device when you are transferring files.
Doing so may cause data loss or device damage.
Transferring data increases the battery power consumption of your device. Ensure
that your device is sufficiently charged before transferring data. If the battery
power is low, data transfer may be interrupted.