Ver.
Smart MBS RRH-P4 Installation Manual
© SAMSUNG Electronics Co., Ltd.
C-1
2600-00CTEIGAA
4.0
ANNEX C.
Assembling connector
C.1 RJ-45 (Shield type)
Below is the method for assembling the RJ-45 (Shield type) connector.
Figure C.1 Assembling the RJ-45 Connector (Shield Type) (1)
1), 2) Prepare work tools and materials.
4) Pass the cable through the
RJ-45 cap.
5) Remove the coating 0.67 in.
(17 mm) from the end.
6) Push the shield backward,
and cut the aluminum shield.
7) Cut the shield leaving a 0.2 in.
(5 mm) of it.
8) Arrange the cable in reference
to the pin map.
9) Cut the cable to make it
0.47 in. (12 mm) long.
3) Pass the cable through the
marking tube.
1
2
3
4
5
6
7
8
9
