Ver.
Smart MBS RRH-P4 Installation Manual/Ver.3.0
© SAMSUNG Electronics Co., Ltd.
C-3
2600-00CTEIGAA
4.0
C.2 RJ-45 (Normal type)
Below is the method for assembling the RJ-45 (Normal type) connector.
Figure C.3 Assembling the RJ-45 connector (Normal type)
1) Prepare work tools and
materials.
2) Insert the RJ-45 cap into the
cable
3) Remove a 0.67 in. (17 mm)
length of the sheath.
4) Arrange the cable referring to
the pin map
5) Cut the cable so that the length
of it is about 0.47 in. (12 mm).
1
2
3
4
5
6
7
8
7) Compress the jack using the
tool.
6) Insert the cable up to the end of
the RJ-45 modular jack.
8) Raise RJ-45 cap to connector
side.
