40
41
Connecting to the TV
In order to operate the TV using a Smart Touch Control, you must first pair it to the TV via Bluetooth.
However, the Smart Touch Control is only available for the paired Samsung TV.
11
Point the Smart Touch Control toward the IR sensor of the TV, and press
TV
button on the Smart
Touch Control. The remote control receiver's location may vary depending on the model.
21
A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then
attempt to connect to the Smart Touch Control automatically.
<Attempting to connect and completion icons>
Reconnecting the Smart Touch Control
If the Smart Touch Control ceases to function mid-use, point the unit towards the TV's remote control
receiver and press the Smart Touch Control’s pairing button to reestablish the connection. The pairing
button cannot be accessed without removing the Smart Touch Control’s battery cover. Press and hold
the pairing button until the "connection" image appears on the TV screen.
<The Smart Touch Control's pairing button>
Battery Low Alarm
If the battery becomes low while using the Smart Touch Control, the following alarm window appears
at the bottom of the left screen. If the alarm window pops up, replace the batteries of the Smart
Touch Control. Use alkaline batteries for longer usage.
<Low battery alarm window>
Summary of Contents for smart tv 32 inch
Page 1: ...SMART TV E Manual ...
Page 49: ...Buttons and Descriptions ...