15
3. Disassembly and Reassembly
Removal of
Handle
4.
Remove 2 screws, then handle is detached from
Door “A” .
Removal of
Door “E”
5.
Following the procedure as shown in the figure,
insert and bend a thin metal plate between Door
“E” and Door “A” until you hear the ‘tick’ sound .
•
Insertion depth of the thin metal plate should be
0 .5mm or less .
PRECAUTION
PERFORM MICROWAVE LEAKAGE TEST
3-4 Replacement of Door Assembly
Summary of Contents for SMH9187ST
Page 3: ...3 1 Precaution ...
