background image

Input/Output 

• 1 video card (SMV-25632) handles signals from 64 cameras & 2 monitors
• Up to 16 video cards (SMV-25632) may be inserted into the main CPU (SMX-25632)

to handle up to 32 monitors

OSD Output

• Supports 16 Korean characters or 32 alphabet letters
• Built-in I/D, time, and generator function for each video card (SMV-25632)
• Features prevention for screen-shakes caused by changes in sync signal when

switching between manual and auto camera

CPU Extension

• Extension set (SME-25632) - 1 extension unit: controls 128 cameras & 32 monitors

2 extension unit: controls 192 cameras & 32 monitors
3 extension unit: controls 256 cameras & 32 monitors

System Distinctions

• Easy to insert/remove, manage, maintain, or extend video cards

Power Unit

• Built-in power unit for safer power supply

VIDEO METRIX SWITCHER

User’s Manual

7

VIDEO METRIX SWITCHER

User’s Manual

6

MAIN POWER

Turns the power of the device on/off 

STATUS

Displays the operating status of the device

ETHERNET SLOT

1. System Connection Diagram 

1-1. Front

System Diagram

Features & Distinctions

Features

• This is an ETHERNET SLOT( ) : do not insert a video card (SMV-25632).
• When inserting a video card (SMV-25632), pay attention to the direction and the

location so as to insert it properly.

• Video card slot 

* Start from the left; insert the card so

that it is facing the left, and push until
it makes a “clicking sound.”

Caution

No. inserted

1
2
3

16

No. of Cameras & Monitors Controlled

64 cameras & 2 monitors
64 cameras & 4 monitors
64 cameras & 6 monitors

64 cameras & 32 monitors

Summary of Contents for SMX-25632











Reviews: