CONNECTING A POWER SOURCE
Be sure to charge the battery pack before you start using your camcorder.
Use the
IA-BH130LB
battery pack only.
The battery pack may be charged a little at the time of purchase.
Battery pack insertion/ejection
It is recommended you purchase one or more additional battery packs to allow continuous use of your camcorder.
Inserting the battery pack
1.
Slide and open the battery slot cover as shown in the fi gure.
2.
Insert the battery pack into the battery slot until it locks.
Make sure that the SAMSUNG logo is facing left while
the battery pack is placed as shown in the fi gure.
3.
Slide and close the battery slot cover.
Ejecting the battery pack
1.
Slide and open the battery slot cover and push the
Battery pack
release
switch.
Gently push the
Battery pack release
switch in the direction
as shown in the fi gure to eject the battery.
2.
Pull the ejected battery out in the direction as shown in the fi gure.
3.
Slide and close the battery slot cover.
•
•
•
•
•
Remove the battery pack separately from the camcorder
while not in use.
It is recommended to prepare an additional battery pack
for prolonged outdoor use.
Additional battery packs can be purchased from
samsungparts.com.
•
•
•
preparation
Insert
Eject
[Battery pack release]
Switch
16_
English