background image

1.

    Read these instructions.

2.

    Keep these instructions.

3.

    Heed all warnings.

4.

    Follow all instructions.

5.

    Do not use this apparatus near water.

6.

    Clean only with dry cloth.

7.

   Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8.

Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.

11.

Only use attachment/accessories specified by the 
manufacturer.

12.

Use only with the cart, stand, tripod, 
bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination to 
avoid injury from tipping over.

13.

Unplug this apparatus during lightning storms or when 
unused for long periods of time.

14.

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped.

This symbol indicates that dangerous voltage consisting a risk of 
electric shock is present within this unit.

This symbol indicates that there are important operating and 
maintenance instructions in the literature accompanying this unit.

important safety instructions

Warning

To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.

Caution

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be 
placed on the apparatus. To disconnect the apparatus from the mains, the plug must be pulled out from the mains 
socket, therefore the mains plug shall be readily operable.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  DO 

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSID

EREFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

vi_

English

Summary of Contents for SMX-C10
















































































































































Reviews: