98_
English
USING THE INTELLI-STUDIO PROGRAMME
Using the built-in Intelli-studio programme in your camcorder, you can transfer video/photo fi les onto your PC and edit them
on your computer. The Intelli-studio offers the most convenient way for you to manage video/photo fi les by using the simple
USB cable connection between the camcorder and your PC.
Step1.ConnectingtheUSBcable
1.
Set the menu
setting
to
“PCSoftware:On.”
page 94
• You will fi nd the default menu settings are set as above.
2.
Connect the camcorder and the PC with the USB cable.
• A new fi le saving screen appears with the Intelli-studio main window.
• According to your computer type, the corresponding removable disk window appears.
3.
Click
“Yes”,
the uploading procedure will start. Click
“Yes”
to confi rm.
• If you do not want to save a new fi le, select
“No.”
DisconnectingtheUSBcable
After completing the data transfer, make sure to disconnect the cable in the following way:
1.
Click on the “Safely Remove Hardware icon”
icon on the taskbar.
2.
Select “USB Mass Storage Device”, and then click “Stop.”
3.
If the “Stop a Hardware device” window appears, click “OK.”
4.
Disconnect the USB cable from the camcorder and PC.
Use the provided USB cable. (Supplied by Samsung)
Don’t apply excessive force when inserting or extracting the USB cable into/from a USB jack.
Insert the USB after checking the correct direction of its insertion.
We recommend using the AC power adaptor as power supply instead of the battery pack.
When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.
If you disconnect the USB cable from the PC or the camcorder while transferring data, the data transfer will stop
and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other
USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC and
reconnect the camcorder.
According to your computer type, the Intelli-studio programme may not run automatically. In this case, open the
desired CD-ROM drive that has the Intelli-studio programme in My Computer and run iStudio.exe.
When an USB cable is connected, according to the application programme (e.g. EmoDio) installed on your
computer, the corresponding programme may start fi rst of all.
•
•
•
•
•
•
•
•
•
using with a Windows computer
Settings
Default Set
PC Software
TV Display
:
STBY
0:00:00[245Min]
:
Off
On
Exit
Move
Select
Downloaded From VideoCamera-Manual.com Manuals