RECORDING WITH EASE FOR BEGINNERS (EASY q MODE)
With the EASY Q function, most of the camcorder settings are automatically adjusted,
which frees you from detailed adjustments.
1.
Open the LCD screen and press the
Power
(
) button to turn on the camcorder.
2.
Press the
EASY Q
button.
When you press the
EASY Q
button, most functions turn off and the following
functions are set to
"Auto."
(Focus, iSCENE, etc. )
The EASY Q and
Anti-Shake(HDIS)
(
) indicator appear on the screen at
the same time.
3.
To record videos, press the
Recording start/stop
button.
To take photo images, press the
PHOTO
( ) button. (SMX-C13/C14 only)
Recording will begin using the basic automatic settings.
To cancell EASY q mode
Press the
EASY Q
button again.
The EASY Q and
Anti-Shake (HDIS)
(
) indicators disappear from the screen.
Most settings will return to the settings that were set prior to activating the EASY Q mode.
Unavailable buttons during EASY q operation
The following button and menu operations are unavailable because the items are automatically set.
And the corresponding message
"Release the EASY Q"
may appear if unavailable operations are attempted.
-
MENU
button /
OK
button
Cancel the EASY Q function if you want to add any effect or settings to the images.
EASY Q mode settings are released when the camcorder is turned off.
EASY Q mode automatically sets the
"Anti-Shake(HDIS)"
to
"On"
while using EASY Q.
•
•
•
•
•
•
•
•
•
•
•
recording
Before recording an important video, make sure to test the recording function to check if there is any problem with the audio
and video recording.
Do not operate the
Power
(
) button or remove the memory card while accessing the storage media.
Doing so may damage the storage media or the data on the storage media.
This camcorder provides one combined video and photo record mode.
You can easily record videos or photos in the same mode without having to change it. (SMX-C13/C14 only)
You cannot use a locked memory card for recording. You will see a message saying recording is disabled due to the lock.
You can switch the play mode to the record mode by pressing the
Recording start/stop
or
Mode
( ) button.
If the power cable/battery is disconnected or recording is disabled during recording, the system is switched to the data
recovery mode. While data is being recovered, no other function is enabled. After data recovery, the system will be switched
to the STBY mode. When the recording time is short, the data recovery might fail.
•
•
•
•
•
•
46_
English
0:00:00 [245Min]
STBY
~GGGG{
~
{
Downloaded From VideoCamera-Manual.com Manuals
