About the storage media
0
1
0
1
INSERTING AND EJECTING A MEMORY CARD (Not supplied)
To avoid data loss, turn off the camcorder by pressing the
Power
(
) button for one second before inserting or ejecting the memory card.
Be careful not to push the memory card too hard. The memory card may suddenly pop out.
•
•
Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards.
Compatibility with this camcorder may vary depending on the card manufacturer and type.
CARD
CARD
To insert a memory card
1.
Turn the camcorder off.
2.
Open the memory card/jack cover as shown in the picture.
3.
Insert the memory card into the card slot until it softly clicks.
Make sure that the camcorder is placed as shown above and
the terminal portion of the card is facing up.
4.
Close the cover.
•
To eject a memory card
1.
Turn the camcorder off.
2.
Open the memory card/jack cover as shown in the picture.
3.
Gently push the memory card to eject it.
4.
Pull the memory card out of the memory card slot and close the
cover.
