Go to "Main Menu"
;
"Parameter"
;
"Network"
;
"Email" to enter into the menu interface. Receive or Send NVR alarm Email
and set parameters like Email address, SSL, Email Enable, and Interval.
•
encryption
: Disable, SSL, TLS and Auto optional. Auto means it can detect
the encryption type automatically. It is recommended to set the encryption
type as Auto.
•
sMtp port
: Mail sending port used by SMTP (Simple Mail Transfer Protocol).
Server is generally Port 25 or Port 465 when SSL is used by Gmail.
•
sMtp server
: Enter the address of the server for the mailbox in use.
•
user name
: Enter a server to connect to. For example, email "aaa@gmail.
com" should correspond to server "smtp.gmail.com"
•
password
: Enter the password of the SMTP server user.
•
sender address
: Sender's mail address, which must correspond to the
server used. For example, mailbox "aaa@gmail.com" should correspond to
server "smtp.gmail.com".
•
receiver 1/2/3
: Recipient's mail address, used to receive alarm image and message from NVR side. If system alarms
continually and sends email images frequently, save the images to another location or remove them, so as to avoid excessive
space occupation and thereby affect your normal use of mailbox.
•
time interval
: A mail will be sent every three minutes by default. If the time interval for mail notification is set too short, email
server may deem mails as junk mails, so they cannot be transferred normally.
email schedule
Select the channel and the date you want to set. One week’s schedule can be
set. The record schedule of the current channel can be copied to any other
channel or all channels.
M
`
Green stands for Motion: Email will be sent in case of object motion;
`
Red stands for Exception: Email will be sent in case of exception, e.g. DiskFull,
DiskError, and VideoLoss.
English
_23
●
nvr
Menu
