•
Sens-up limit : Set the work condition to Auto mode in a low contrast scene.
•
AGC mode : Select AGC Control mode.
Adjust the gain value of the video (that, in particular, was recorded at a low
contrast scene and had a lower brightness level than normal) to control the video
brightness.
Special Setup
1.
Select <
Special
>.
2.
Select each item and set it properly.
•
Day & night : You can switch the
mode to adjust the black and white
level as well as the colors.
- Color : Always displays the video in
colors.
- B/W : Always displays the video in black and white.
- Auto : Displays in color mode during normal daytime and switches to black and
white mode in a low contrast scene at night.
`
If you set the AGC mode to OFF from <
Exposure
>, the AUTO DAY/NIGHT mode will be disabled
accordingly.
•
Dwell time : This is the time while each applicable lighting condition is kept in
order to enable the switch between day and night modes.
•
Duration : Specify the time interval of lighting at which the sequence operation is
triggered.
•
Sharpness mode : Adjust the overall sharpness of the image.
If selecting <
on
>, you can adjust the sharpness of the image.
•
Sharpness level : The higher the level is, the sharper and clearer the outline of the
image becomes.
•
Gamma : Adjust the contrast of the image.
•
Color level : Adjust the color level of the image.
English
_41
●
Setup
Screen
