setup screen
upgrade / reboot
1.
From the Setup menu, select the
<
System ( )
> tab.
2.
Click <
upgrade / reboot
>.
3.
Select a desired item and set it
appropriately.
•
Upgrade : Performs upgrading the
system.
•
Factory default : Resets the system
to the factory default.
- Except network parameter : Initialize all setup parameters except for network or
lens setup.
- All : Resets all settings including the camera settings. (however, the log
information will not be reset)
`
The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is
found, the previous settings will be restored automatically.
•
Configuration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration.
•
Restart : Restarts the system.
to perform the upgrade
1.
Click [
upgrade
].
2.
Click [
Browse
] and specify a file to
upgrade.
3.
Click [
Send
].
4.
The “
upgrade
” dialog appears where
the progression will be shown in the
bottom.
5.
Once completed upgrading, the
browser exits and the camera restarts.
110_
setup screen
