background image

Samsung Techwin cares for the environment at all product manufacturing stages, and is 

taking measures to provide customers with more environmentally friendly products. 

The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly 

products, and indicates that the product satisfies the EU RoHS Directive. 

This equipment has been tested and found to comply with the limits for a 

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference when 

the equipment is operated in a commercial environment. 

This equipment generates, uses, and can radiate radio frequency energy and, 

if not installed and used in accordance with the instruction manual, may cause 

harmful interference to radio communications. Operation of this equipment in a 

residential area is likely to cause harmful interference in which case the user will 

be required to correct the interference at his own expense.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should 

not be disposed of with other household waste at the end of their working life. Where marked, the 

chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the 

reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances 

can cause harm to human health or the environment. 
To protect natural resources and to promote material reuse, please separate batteries from other types 

of waste and recycle them through your local, free battery return system.

Correct Disposal of This Product 

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its 

electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other 

household waste at the end of their working life. To prevent possible harm to the environment or 

human health from uncontrolled waste disposal, please separate these items from other types 

of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or 

their local government office, for details of where and how they can take these items for 

environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the 

purchase contract. This product and its electronic accessories should not be mixed with other 

commercial wastes for disposal.

Summary of Contents for SNV-5084





















































































































































Reviews: