9
E
E
8
Installing the SOC-320(P)
1. Find a suitable place for installing the camera. (Must be able to bear five times
the weight of the camera [approx. 1Kg])
2. Install the Mounting Bracket provided at the
desired location, and assemble the camera onto
the bracket. Then connect the cable to the RJ-45
connector.
3. Plug the other end of the cable that is connected to the camera into the monitor.
4. Use the Handle on the Mounting Bracket when
adjusting the direction of view.
5. Adjusting Zoom and Focus
5-1. Turn the lens part of the camera in the direction shown in the picture and pull
to separate the lens -hood.
Installing the SOC-320(P)
5-2. Use the lens Zoom Lever to set the desired zoom
position.
5-3. After setting this position, adjust the Focus Lever
to get the picture into focus.
5-4. When the zoom and focus settings are finished,
rotate the Zoom and Focus Levers to fix the lens
in position.
5-5. After the adjustment, put the lens hood onto the
camera body and rotate it in the locking direction
to connect it.
