COLOR CCD CAMERA
COLOR CCD CAMERA
User’s Manual
User’s Manual
17
16
Connection
• The wire is non-polarized.
• Use AC24V ~ 60Hz power source for SOC-4020NA/W
• Use AC24V ~ 50Hz power source for SOC-4020PA/W
For AC Power Type
• Be sure to connect power after all the installation is done.
• Note that AC adaptor is not supplied with camera.
• Use only AC 24V UL listed class 2 power supply.
• Since the wire of DC power type is polarized, be careful when connecting it.
• Do not use power sources other than that specified.
• To prevent fire or electric shock hazard, use a UL listed cable (VW-1, Style 1007).
Notes
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem
Nothing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not working
properly, and the surface
of the camera is hot.
The image on the
screen flickers.
L/L mode isn’t able to
be selected.
Solution
• Check that the power cord and line connection
between the camera and monitor are fixed properly.
• Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
• Is lens stained with dirt? Clean your lens with soft,
clean cloth.
• Set the monitor to proper condition.
• If the camera is exposed to too strong light, change
the camera position.
• Adjust the lens’ focus properly.
• Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75
Ω
/ Hi-z
properly. (refer to page 14)
• Adjust DC Level, VR Level properly (refer to page 10)
• Check that you have properly connected the camera
to an appropriate power source. (refer to page 15)
• Is the camera facing to direct sunlight or fluoresent
lighting? Change the camera position.
• Have you connected your camera to DC power
source? Connect it to AC power source.
(SOC-4020Series)
Troubleshooting