![background image](http://html.mh-extra.com/html/samsung/sp-a8000/sp-a8000_owners-instructions-manual_352543041.webp)
3-6
Using
3D
•
<3D View Point> : The overall adjustment of 3D perspective.
This function is deactivated when <3D Mode> is set to
(2D
→
3D) or <Off>.
•
<Depth> : Specify the level of 3D effect for converting a 2D video to 3D. Range: 1–10 levels
This function is only activated when the <3D Mode> is set to
(2D
→
3D).
•
<Picture Correction> : Adjusts the images for the left and right eye.
•
<3D Auto View> : Set 3D picture mode to be automatically activated for HDMI1.3 3D video input.
•
<Off> - <On>
If a 3D failure occurs due to a 3D information error, set <3D Auto View> to <Off> and
manually select a <3D Mode> using the 3D button or corresponding menu.
<3D Auto View> Support resolution
•
3D video input with one of the following resolutions will automatically switch the HDMI signal to
3D in
(Side by Side) mode. (16:9 only)
•
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input. An input resolution other
than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.
•
Standard HDMI 3D Formats
The 3D formats listed below are recommended by the HDMI association and must be
supported.
•
The projector automatically switches to 3D mode if it inputs one of the source signal
formats above.
•
For the Standard HDMI 3D format with 24Hz, the Projector is optimized as follows:
Judder Reduction Display Mode: When <Motion Judder Canceller> is set to
<Smooth>, you can watch a smooth picture without judder.
•
The <
3D Emitter
> setting does not change automatically.
Select the signal for the emitter you want to use.
•
Internal emitter: <
3D Emitter
> - <Internal>
•
External emitter: <
3D Emitter
> - <External>
You cannot use the internal and external emitters at the same time.
•
<DLP Link™>
You can use the 3D glasses which the DLP Link function was applied to.
•
<Off> - <On>
MENU
DESCRIPTION
<
3D Emitter
>