3-6
Using
Screen
•
<Coarse> / <Fine> : Removes or reduces picture noise. If the noise is not removed by Fine-tuning
alone, then adjust the frequency as best as possible (<Coarse>) and Finetune again. After the
noise has been reduced, readjust the picture so that it is aligned to the Center of screen.
Available in <PC> Mode Only
•
<Position> : Adjust the PC screen position with direction button (
▲
/
▼
/
◄
/
►
).
•
<Zoom> : You can enlarge any area on the screen by using the numeric buttons (1 - 9) on the
remote.
Available in <PC> Mode Only
•
<Image Reset> : Return the display settings to the factory defaults.
Advanced Setting
•
<Black Tone>
Select the black level to adjust the screen depth.
<Off> - <Dark> - <Darker> - <Darkest>
You can not set in <PC> mode.
•
<Dynamic Contrast>
Adjust the screen contrast.
<Off> - <Low> - <Darker> - <High>
•
<Color Pattern>
You can filter the color of the entire screen according to your taste. Make optimal display settings
for movies.
•
<Off> : Shows the picture in the original color.
•
<Monochrome> : Shows the picture in black and white by filtering out all color signals.
•
<Red> : Shows the picture in red by filtering out the green and blue color signals.
•
<Green> : Shows the picture in green by filtering out the red and blue color signals.
•
<Blue> : Shows the picture in blue by filtering out the red and green color signals.
You can not set in <PC> mode.
•
<Flesh Tone>
Emphasize pink “Flesh Tone.”
You can not set in <PC> mode.
•
<Edge Enhancement>
Emphasize object boundaries.
<Off> - <On>
You can not set in <PC> mode.
•
<xvYCC>
Setting the <xvYCC> mode on increases detail and the color space when you display movies from
an external device (e.g. BD/DVD player) connected to the [HDMI IN] or [COMPONENT IN] jacks.
<Off> - <On>
•
Available when the picture mode is set to <Movie> and when the external input is set to
<HDMI> or <Component>.
•
Some external devices may not support this function.
MENU
DESCRIPTION