63
62
You can select a base unit through which you want your handset to
operate.
1. In the Standby mode, press the
Menu
soft key.
2. Press the
soft key repeatedly until
Base
appears, and then press
the
Select
soft key.
3. Select
Base
is displayed. Press the
Select
soft key.
4. The available bases are displayed. The base to which your handset is
registered has a check mark on its right-hand.
5. Press the
soft key repeatedly to choose the desired base unit.
6. Press the
Select
soft key to confirm.
Selecting Base Manually
With the ‘Auto Find’ feature set to On, if you are moving around, and
lose contact with the base unit, the handset will automatically find the
first available base unit. The feature is preset to ‘Off’.
1. In the Standby mode, press the
Menu
soft key.
2. Press the
soft key repeatedly until
Base
appears, and then press
the
Select
soft key.
3. Press the
soft key repeatedly until
Auto Find
appears, and then
press the
Select
soft key.
4. The display shows the current setting;
Off
or
On
. Press the
soft
key to choose Off or On.
5. Press the
OK
soft key to confirm.
Finding Base Automatically
The SP-R6150 handset may be used with up to four base units. To use
the handset with more than one base unit, you must register the handset
to each base unit. Refer to ‘Registering a New Handset’ on page 55.
(MENU 7-1)
(MENU 7-2)
Automatic Answering Operation
If you turn the answering system on, the phone will answer a call after a
specified number of rings. The caller will hear a pre-recorded greeting
message: “Hello, no one is available to answer your call. Please leave
your message after the beep.” If you want, you can change the greeting
message by recording your own message. After a beep, the phone will
record the caller’s message. While the message is being recorded, you
can hear the call through the base speaker. If you want to talk with the
caller, pick up the handset or press
key on the base.
• You can record, play, or set the answering options on the base
regardless of whether the handset is on the line or in the Standby
mode.
• You can also operate the base answering features remotely by using
your handset or from a touch-tone phone. See page 77 and 78
respectively.
• You cannot operate answering features on the base while the handset
is using answering features, and vice verse.
• If an incoming call comes in while you are operating answering
features (record, play, or set options), the phone will cancel the
operation and start ringing.
• Your phone is capable of recording a maximum of 120 memos and
caller messages.
Answering System
Base
