English - 56
Setting Up Your Remote Control
This TV’s remote control can operate VCR, CATV , DVD, or
Set-top box (STB), in addition to controlling the TV.
➢
The remote control might not be compatible with all DVD
Players, VCRs and Cable boxes.
1
Turn off your VCR, Cable box, DVD or STB.
2
Press the
SELECT
button. Mode is changed whenever
SELECT
button is pressed.
3
Press the
POWER
(
) button on the remote control.
The component you select should turn on. If it turns on, your remote
control is now set correctly.
4
Once your remote control is set up, press the
SELECT
button any
time you want to use the remote control to operate your VCR,
Cable box, DVD or STB.
➢
When your remote control is in the
VCR
,
CATV
,
DVD
or
STB
mode, the volume buttons still control your television’s
volume.
➢
To program the cable receiver controls:
◆
Press the
SELECT
button to select
CATV
.
◆
Point the remote control at the cable receiver and press
the
SET
button. Then press the company code number(s)
for the component in page 58.
Ex)
If the component is manufactured by Oak, press 026.
➢
To program the
VCR
controls:
◆
Press the
SELECT
button to select
VCR
.
◆
Point the remote control at the
VCR
and press the
SET
.
button. Then press the company code number(s) for the
component in page 57 or 58.
➢
To program the
DVD
controls:
◆
Press the
SELECT
button to select
DVD
.
◆
Point the remote control at the
DVD
and press the
SET
.
button. Then press the company code number(s) for the
component in page 58.
VCR
BP68-00478E-00Eng_0826 8/26/05 6:08 PM Page 56
