English
15
Connection & Control
of
TO CONTROL THE CAMERA USING RS-232 DEVICE
VIA COAXIAL COMMUNICATIONS
Connect the product to DC 12V power source or insert 4 AA-sized
batteries into the battery compartment.
(Power can be supplied via USB cable connection.)
Set the protocol switches 7 and 8 to
ON
.
Connect the
VIDEO IN
of the unit and
VIDEO OUT
of the AI Camera
directly.
For proper data communication, the unit and AI camera should be connected directly.
(If you connect a DVR or keyboard in the middle of the main unit and AI camera,
bidirectional communication will not be established.)
Connect
VIDEO OUT
of the main unit to a monitor’s video input terminal.
Connect the RS-232 device’s cable to the RS-232 port of the main unit.
Using RS-232 device, you can control the camera menu.
The RS-232 device is the same as RS-485 regarding the protocol setting, but
supports only the Samsung protocol.
For proper coaxial communication, AI camera should be set to Samsung protocol.
Refer to the switch settings. (See page 18)
1.
2.
3.
–
4.
5.
6.
–
–
RS-232 and RS-485 communications cannot be used for simultaneous input.
RS-232 device control supports SAMSUNG-E protocol only.
NOTE
ADDRESS
(X)100
(X)10
(X)1
POWER
OFF
ON
CABLE
COMPENSATION
S
L
REMOTE CONTROLLER SCP-300
POWER
STATUS
TERMINATION
PROTOCOL
1
ON
2345678
1
ON
2
