Section 2: Understanding Your PCS Phone
2A: Your PCS Phone: The Basics
20
The following options are also displayed. To select an option, press the
corresponding softkey button.
Quiet
to mute the ringer.
Ignore
to send the call to your voicemail box.
Answering a Roam Call With Call Guard Enabled
To answer a call when you are roaming and Call Guard is enabled:
■
Select Answer to answer the call. (See “Call Guard” on page 48 for
additional information.)
Note:
If your phone is off, incoming calls go to voicemail.
Ending a Call
To disconnect a call when you are finished:
■
Close the phone or press
.
Missed Call Notification
When an incoming call is not answered, the Missed Call Info is displayed
on your screen.
To call a Missed Call entry:
1.
Highlight the entry and press
.
2.
Press
to dial the phone number.
Calling Emergency Numbers
You can place calls to 911 (dial
) and press
, even if
your phone is locked or your account is restricted.
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone: The Basics
21
Using One/Two/Three Touch Speed Dialing
With this feature, you can automatically call Speed Dial entries using
one key press for locations 1-9, two key presses for locations 10-99, or
three key presses for locations 100-300.
To use
One-Touch Dialing
for Speed Dial locations 1-9:
Press and hold the appropriate key for a few seconds. The display
confirms that the number has been dialed when it shows “Calling.”
To use
Two-Touch Dialing
for Speed Dial locations 10-99:
1.
Press the first digit.
2.
Press and hold the second digit for a few seconds. The display
confirms that the number has been dialed when it shows “Calling.”
To use
Three-Touch Dialing
for Speed Dial locations 100-300:
1.
Press the first digit.
2.
Press the second digit.
3.
Press and hold the third digit for a few seconds. The display confirms
that the number has been dialed when it shows “Calling.”
Dialing Options
Dialing options are displayed when you enter numbers using the keypad.
To select an option press
and the number on the keypad that
corresponds with the desired choice.
(1) Talk
is used to dial the phone number. (If you are roaming and
have the Call Guard feature activated, you must then press
. See
"To Place Roaming Calls With Call Guard On" on page 49.
(2) Save
to save the phone number in your Internal Phone Book. See
"Finding Internal Phone Book Entries" on page 64.
(3) Find
is used to locate and display Internal Phone Book entries
that contain the numbers entered. See "Finding Internal Phone Book
Entries" on page 64.
(4) Hard Pause
is used to insert a hard pause.
(5) 2sec Pause
to insert a 2-second pause.
