13
When you open the refrigerator door, a light comes on to help you
find what you are looking for more easily. If you need to replace
the bulb(s), proceed as follows.
Type A or F
1
Remove the chiller compartment by:
◆
Pulling it towards you until it meets the stop
◆
Tilting the front up slightly and continuing to pull the
compartment towards you
2
With a flat-bladed screwdriver, prise out the upper part of the light
cover. Pull the cover free.
3
Unscrew and remove the two light bulbs.
4
Insert two new bulbs (maximum of 15 W, E14 small screw base).
5
Replace the light cover by pushing it until it clicks back into place.
6
Replace the chiller compartment by sliding it back into position.
Type B, C, D or E
1
Remove the chiller compartment (types B and E only) by:
◆
Pulling it towards you until it meets the stop
◆
Tilting the front up slightly and continuing to pull the
compartment towards you
2
Remove any shelves that are in front of the light cover, by:
◆
Lifting them slightly
◆
Pulling them towards you
3
With a flat-bladed screwdriver, prise out the lower part of the light
cover. Pull the cover free.
4
Unscrew and remove the light bulb.
5
Insert a new bulb (maximum of 15 W, E14 small screw base).
6
Replace the light cover by:
◆
Aligning the three tabs at the top
◆
Pushing the upper part into position first
◆
Then pushing the lower part into position
7
Replace the chiller compartment and/or any shelves by sliding
them back into position.
GB
Changing the Light Bulb(s)
TEMP CONTROL
TEMP CONTROL
SR-28/29/42/43/ENG 18-12-59 15:30 Page 13
