background image

Quick Freeze

Fuzzy

This light switches on when you press the QUICK FREEZE button.

Press the button again to cancel the Quick Freeze mode. The freezer automatically
switches back to the normal control mode after 2.5 hours.

When the power cord is connected to the wall socket, the Fuzzy light is on. 
The compressor, fan and defrosting heater are automatically controlled to 
optimise food storage.

Temperature Display
Displays the current and selected freezer 
temperatures.

Freezer Display
Indicates that you are setting the freezer 
temperature or have opened the freezer door.

Temperature Display
Displays the current and selected refrigerator
temperatures.

Refrigerator Display
Indicates that you are setting the refrigerator 
temperature or have opened the refrigerator door.

CONTROLLING THE FREEZER AND REFRIGERATOR TEMPERATURES

Freezer

The freezer can be set to a temperature between 
-14°C and -26°C.

Press the FREEZER TEMP. button repeatedly until the
required temperature is shown in the temperature dis-
play.

The temperature display changes in sequence between
-14°C and -26°C. When the display reaches 
-26°C, it returns to -14°C.

After five seconds, the display reverts to the average 
freezer temperature, which changes as the freezer
reaches the new temperature.

Refrigerator 

The refrigerator can be set to a temperature between 

7°C and -1°C.

Press the REFRIGERATOR TEMP. button 
repeatedly until the required temperature is shown in 

the temperature display.

The temperature display changes in sequence and
reverts same as the freezer control methods.

When the setting temperature is -1°C  or 0°C, it can cuase water 

on the shelf freeze slightly. If your unit has Auto lcemaker & Water 
Dispenser, be sure to set the refrigerator temperature above 0°C,   
because a reservoir system is in the refrigerator compartment.

Vacation

When the vacation light is on, the refrigerator is switched off but not the freezer.
Press the button again to cancel the Vacation mode. Be sure to remove all food in
the refrigerator when you select this mode.

INDICATORS (BASIC MODEL)

Lock

This light indicates that the four function buttons have been locked.

To lock the buttons, press the FREEZER TEMP. and REFRIGERATOR TEMP. 
buttons at the same time for about three seconds. Press both buttons again for
about three seconds to unlock them.

7

DA68-00500P  6/26/02 2:34 PM  Page 7

Summary of Contents for SR-S20NTCS

































Reviews: