background image

04_

 

safety information

VACUUM CLEANING ROBOT

•  Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc.  
•  Do not use without a filter in place. When servicing the unit, never put fingers or other objects 

into the fan chamber in case the unit accidentally turns on.

•  Do not put any objects into openings. Do not use with any openings blocked; keep openings 

free of dust, lint, hair, and anything that may reduce air flow.

•  Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner, etc.).
•  Do not pick up anything that is burning or smoke, such as cigarettes, matches, or hot ashes.
•  Do not use to pick up flammable or combustible liquids such as gasoline, nor use on areas 

where they may be present.

•  Do not use vacuum cleaning robot in an enclosed space filled with vapours given off by oil 

based paint, paint thinner, moth proofing substances, flammable dust, or other explosive or 
toxic vapours.

•  Leaks from battery cells can occur under extreme usage or temperature conditions. If the liquid 

gets on skin, wash quickly with water. If the liquid gets into the eyes, flush them immediately 
with clean water for a minimum of 10 minutes. Seek medical attention.

safety information

DJ68-00633G-04.indd   4

14. 6. 18.   �� 1:37

Summary of Contents for SR895 Series

















































Reviews: