background image

12_

 

overview

overview

REMOTE CONTROL

Using the Numeric buttons

1. 

Select a number between 1 and 4.

2. 

Move to the selected channel number.

Changing the Remote Control ID

Remote control’s ID and NVR’s ID should be matched for proper operation.

1. 

Press the [

ID

] button of the remote control and check the ID displayed on the NVR screen.

The factory default ID of the remote control is 00.

2. 

Enter 2 digits of your selection in order, while pressing the [

ID

] button of the remote control.

3. 

When ID input is done, press the [

ID

] button of the remote control again to check the setting.

 

M

 

`

If you want to change the remote control ID to 08: Press 0 and 8 in order while the [

ID

] button of the remote control is 

pressed.
For changing the ID of remote device, refer to “

Remote Devices

”. (Page 67)

POWER

Displays the Exit pop up screen.

REC

Starts or ends the live recording.

ID

Sets the ID of the system.
Select 2 digits from 0 ~ 9 while pressing the ID Key.

VIEW

Runs the View function in the PTZ mode.

BACKUP

Displays the Backup Menu.

RETURN

Returns to the previous screen.

REC LOCK

Selects the recording lock function.

AUDIO

Turns Audio on/off.

Up/Down/Left/Right(

▲▼◄ ►

)/ENTER

Moves the cursor up/down/left/right, and runs the 
Select Menu.

Move Frame

While paused, moves to the previous/next frame.

SCROLL 

,.

Moves the menu scroll.

FR, STOP, PLAY/PAUSE, FF

MODE

Changes the screen mode.

MENU

Display the live screen menu.

ZOOM

Runs the digital zoom (x2) function.

NUMBER [0~+10]

Used as the numeric input keys, or displays a single 

channel.

T/W

Zooms in or out.

PTZ

Displays or ends PTZ.

SEARCH

Displays the search menu.

PRESET

Displays the Preset Setup.

FREEZE

Freezes the screen temporarily.

Skip Backward (by unit time), 

Slow Rewind, Slow Forward, 

Skip Forward (by unit time)

ALARM

Cancels the Alarm.

Summary of Contents for SRN-472S































































































































































Reviews: