26_
live
live
Name
Description
System
Operation
It is displayed when the max permitted amount of data for each channel is exceeded.
It is displayed when the network is overloaded.
`
It occurs when the max receiving allowance is exceeded, causing an overload to the
CPU. It will disappear if you modify the camera settings or delete a camera to reduce
the performance burden.
It is displayed when there is firmware to update the server.
Video Input
Status
Displayed if no input is entered in the condition that the camera is set to <
ON
>.
Displayed if no permission to live view is granted.
If a camera is <
OFF
>, or if no camera is registered, or it is in <
Covert2
> mode, nothing
will be displayed on the screen.
If the camera is set to <
Covert1
>, the video will be displayed but the OSD menus will not
be displayed.
Camera Title / Channel
Display the camera title and channel number.
Camera
Operation
This icon is displayed for a channel that a PTZ-featuring camera is connected to.
Displays AUDIO ON/MUTE. Not displayed in video mode if deactivated.
If the sensor is set to <
ON
>, the input signal will be displayed on the screen of the
connected channel.
This icon is displayed when Motion Detection is set to <
ON
> and a camera motion or
camera event occurs.
It displays the status of general/event/scheduled recording.
It is displayed when it fails to decode all the frames due to limited decoding performance
and in this case only the I-Frame is decoded.