SETTING THE DEVICE
You can setup Camera, Storage Device and Monitor.
Camera
To register a camera
You can register a network camera for each channel and make connection between.
[
MENU
]
Ö
[
ENTER
]
Ö
▼
Ö
<
Menu
>
Ö
[
ENTER
]
Ö
▼
Ö
<
Device
>
Ö
►
Ö
<
Camera
>
Ö
[
ENTER
]
Ö
▼
Ö
<
Cam Registration
>
Ö
▲▼◄►
Ö
[
ENTER
]
• Preview : View the video of the channel as a current image.
• Protocol : Show the protocol information of a registered network camera.
• Model : Show the camera model name.
• IP Address : Display the IP address of a network camera.
• Connection : Display the connection status.
• Data Rate : Displays the total amount of data received by the channel.
• Performance : Displays the necessary performance occupancy rate for receiving the amount of data.
`
A camera registered with the RTSP, ONVIF protocols can occupy twice the capacity of the existing amount of data.
M
`
If the NVR has been initialized, it may not connect to cameras. Configure the network settings first and add cameras.
For more information on network settings, refer to "
Network Configuration
". (Page 76)
52_
menu setup
menu setup