n = 3 : Error status
Bit Off/On Hex Decimal Function
0
Off
00
0
Not used. Fixed to Off.
1
On
02
2
Not used. Fixed to On.
2
-
-
-
Undefined.
Off
00
0
No auto-cutter error.
3
On
08
8
Auto-cutter error occurs.
4
On
10
16
Not used. Fixed to On.
Off
00
0
No unrecoverable error.
5
On
20
32
Unrecoverable error occurs.
Off
00
0
No auto-recoverable error.
6
On 40 64 Auto
recoverable error occurs.
7
Off
00
0
Not used. Fixed to Off.
Bit 3:
If these errors occur due to paper jams or the like, it is possible to
recover by
correcting the cause of the error and executing DLE ENQ n(1
≤
n
≤
2).
If an error due to a circuit failure (e.g. wire break) occurs, it is impossible
to
recover.
Bit 6:
When printing is stopped due to high print head temperature until the print
head temperature drops sufficiently or when the paper roll cover is open
during printing, bit 6 is On.
n = 4 : Continuous paper sensor status.
Bit Off/On Hex Decimal Function
0
Off
00
0
Not used. Fixed to off.
1
On
02
2
Not used. Fixed to On.
2
Off
00
0
Paper roll near-end sensor. Paper adequate.
3
On
0C
12
Paper near-end is detected by the paper roll
near-end sensor.
4
On
10
16
Not used. Fixed to On.
5
Off
00
0
Not roll end sensor. Paper present.
6
On
60
96
Paper is detected by the paper roll end
sensor.
7
Off
00
0
Not used. Fixed to Off.
DLE ENQ n
[Name]
Real-time request to printer.
[Format] ASCII DLE
ENQ n
Hex
10
05 n
Decimal
16
5
n
[Range] 1
≤
n
≤
2
[Description] Recover from an error and restart printing from the line where the error
occurred
