12_
setting up
INSTALLING THE WATER
DISPENSER LINE
For Exterior model
Parts for water line Installation
Connecting to the water supply line
Connect the water pipe with coupler and tap.
1.
Close the main water tap.
2.
Connect coupler “A” to the tap.
Select the location where the purifi er
is to install. (Model with the purifi er)
-
If you wish to reassemble the water inlet
and outlet sides of the purifier during purifier
installation, see the reference illustration.
-
Cut the water line attached to the purifier to the
appropriate place after measuring the distance
between the purifier and the cold water tap.
•
Samsung Warranty does not cover WATER LINE
INSTALLATION.
•
The cost of connection to a water supply is at the
customer expense, unless included in the delivery
charge (refer to the delivery agreement with the
seller)
•
Please contact Plumber or Authorised Installer for
the installation if needed.
•
If Water leakage occurs due to improper
installation, Please contact installer.
Water line fixer and screws
Water line fixer and screws
Pipe connector
Pipe connector
Water line
Water line
Purifier lock-clip
Purifier lock-clip
Purifier
Purifier
CAUTION
The water line must be connected to the cold water
pipe. If it is connected to the hot water pipe, it may
cause the purifi er to malfunction.
WARRANTY INFORMATION
This water line installation is not covered by the
refrigerator or ice maker manufacturer’s warranty.
Follow these instructions carefully to minimise the risk of
expensive water damage.
Note:
If the coupler does not fi t on the current tap, go the
nearest authorised service dealer and purchase the right
couplers fi ttings.
DA99-02028A (EN)-10.indd 12
DA99-02028A (EN)-10.indd 12
13. 6. 19.
10:25
13. 6. 19.
10:25
