08_
setting up
REATTACHING THE
REFRIGERATOR DOORS
Once you have safely placed your refrigerator where
you plan for it to stay, it is time to put the doors back
on.
Reattaching the Freezer Door
1.
Replace the freezer door by inserting the water
line
1
back into the lower corner of the door and
then into the hole on the lower hinge
2
.
Gently pull the water line back down so that it
runs straight, with no kinks or bends.
2.
Insert the upper hinge shaft
3
into the hole on
the corner of the freezer door
4
.
Make sure the hinge is level between the upper
hinge hole
5
and the hole of the cabinet
6
and
reattach the hinge screws
7
and ground screw
8
by turning in a clockwise direction.
Reconnect the wires.
3.
Place the front part of the upper hinge cover
9
on the front of the upper hinge
10
and reattach
with the screw.
Removing the Fridge Door
1.
With the door closed, remove the upper hinge
cover
1
using a screwdriver.
2.
Remove hinge screws
2
and the ground screw
3
by turning counter-clockwise, and take off the
upper hinge
4
. Be careful that the door does not
fall on you as you are removing it
3.
Remove the door from the lower hinge
5
by
lifting the door straight up
6
.
4.
Remove the lower hinge
7
from the bracket
8
by gently lifting the lower hinge upwards.
1
4
2
3
10
9
4
5
6
7
8
3
1
2
DA99-02028A (EN)-10.indd 08
DA99-02028A (EN)-10.indd 08
13. 6. 19.
10:25
13. 6. 19.
10:25
