setting up
_09
01 SETTING
UP
Reattaching the Water Supply Line
1.
Insert the water line
2
into the coupler
1
.
2.
The Water Line must be fully Inserted to the
center of transparent coupler to prevent water
leakage from the dispenser.
3.
Insert the clip in the install pack and check that it
holds the line firmly.
Reattaching the Front Leg Cover
Before attaching the cover, check water
connector for leakage.
Replace the front leg cover by turning the
three screws clockwise, as shown in the
fi gure.
Reattaching the Fridge Door
1.
Insert the lower hinge
1
back into the lower
hinge bracket
2
.
2.
Fit the hole in the corner of the fridge door
3
over the lower hinge
4
.
3.
Insert the upper hinge shaft
5
into the hole
on the hinge
6
. Make sure the hinge is level
between the upper hinge hole
7
and the hole on
the top of the cabinet
8
.
Then, reattach hinge screws
9
and the ground
screw
10
by turning it in a clock wise direction.
4.
Place the front part of the upper hinge cover
11
on the front of the upper hinge
12
and reattach it
with the screw.
1
2
3
4
12
11
1
2
Center of transparent
Center of transparent
coupler
coupler
clip A (1/4”)
clip A (1/4”)
(6.35mm)
(6.35mm)
DA99-02028A (EN)-10.indd 09
DA99-02028A (EN)-10.indd 09
13. 6. 19.
10:25
13. 6. 19.
10:25
