30_
reader mode setup
reader mode setup
READER #1 MODE
READER#1 is the default reader that is built in this product.
Press the
F
1
SETUP MENU button.
Use the buttons
4
and
6
to move to the
READER#1 MODE
item and
press
ENT
.
Use the buttons
4
and
6
to select a reader mode.
3 modes are available for your choice.
ID ONLY : In this mode, you can get access only with the proximity card
or ID number.
ID +F/P(P/W) : In this mode, you can get access through the fingerprint
authentication after entering the proximity card or ID
number.
If you have not registered your fingerprint, you can get
access with the password authentication.
ID+P/W+F/P : In this mode, you can get access through the two-pass
authentication of the password and your fingerprint after
using the proximity card or entering the ID number.
When done, press
ENT
to save your settings.
READER #2 MODE
READER#2 is an external reader for exit.
Press the
F
1
SETUP MENU button.
Use the buttons
4
and
6
to move to the
READER#2 MODE
item and
press
ENT
.
Use the buttons
4
and
6
to select a reader mode.
2 modes are available for your choice.
ID ONLY : In this mode, you can get access only with the proximity card
or ID number.
ID+P/W : In this mode, you can get access through the password
authentication after using the proximity card or entering the ID
number.
When done, press
ENT
to save your settings.
1.
2.
3.
•
4.
1.
2.
3.
•
4.
3. READER#1 MODE
ID ONLY
3. READER#1 MODE
J
ID+F/P(P/W)
3. READER#1 MODE
ID+F/P(P/W)
4. READER#2 MODE
ID ONLY
4. READER#2 MODE
J
ID+P/W
4. READER#2 MODE
ID+P/W
