36_
user management
user management
To register the ID card along with your fi ngerprint
Follow the steps 1 through 4 in “To register the ID card” above
Set each of PW/TA/TB/C/RD/MA/MB/LV/FP.
For more information about each item, refer to “ID Registration Items” on
page 35.
Set FP to 1.
Press
ENT
.
Place your fi nger on the fi ngerprint scanner.
Release your fi nger, then put your fi nger onto the fi ngerprint scanner
again when the light turns on.
Your ID and fi ngerprint will be registered.
To register the PIN number
Press the
F
7
SETUP MENU button.
Use the buttons
4
and
6
to move to the
REGISTRATION
item and
press
ENT
.
Press the button
2
to select
PIN
.
For card registration, select the
CARD
to register the ID.
For PIN registration, select
PIN
and use the keypad to register the ID.
Use the keypad to enter the ID and press
ENT
.
Set each of PW/TA/TB/C/RD/MA/MB/LV/FP.
For more information about each item, refer to “ID Registration Items” on
page 35.
Set
FP
to 0.
ID registration is completed.
You can use the keypad to enter the ID in the following digits depending on the
model.
- PIN Range
SSA-S30x0 : Numeric letters in 4 ~ 8 digits
Ranges from 00000001 to 99999999
SSA-S30x1 : Numeric letters in 4 ~ 8 or 10 digits
Ranges from 0001 to 99999999, 0000000001 to 4294967295
5.
•
•
•
6.
7.
8.
1.
2.
3.
•
4.
5.
•
•
6.
M
1/2
TO REGISTER F/P
PUT YOUR FINGER
2/2
LIFT AND
PUT YOUR FINGER
FP QUALITY
Q_#1[4] Q_#2[4]
ID REGISTERED!
1. REGISTRATION
1. REGISTRATION
1:CARD 2:PIN
1. REGISTRATION
ID:
1. REGISTRATION
ID:1230001
PW_ TA TB C
RD MA MB LV FP
ID REGISTERED!
