42_
user management
user management
TWO MEN OPERATION MODE
With TWO MEN MODE active, the door will be opened if both administrator card and visitor card are entered in a row
within 10 seconds.
Press the
F
3
SETUP MENU button.
Use the buttons
4
and
6
to move to the
TWO MEN MODE
item and
press
ENT
.
Use the buttons
4
and
6
to select
USE
or
NOT USE
, and press
ENT
.
USE : TWO MEN MODE is enabled.
NOT USE : TWO MEN MODE is disabled.
To enable this function, the preferred administrator card should be assigned code 1, while the visitor card be
assigned code
2. (See Page 35 for “Registering the ID ”.)
TO CHECK THE NUMBER OF EVENTS
You can check the total number of events stored in the memory. When an event is stored in the memory, the count will
increase accordingly.
The total number of events is 20,000.
Once a specifi c event is uploaded successfully to the host PC, it will be removed from the internal memory.
Press the
F
7
SETUP MENU button.
Use the buttons
4
and
6
to move to the
EVENT COUNT
item.
The number of events stored in the memory will be shown.
To remove the event, refer to “To delete all events”. (see page 43)
The number of registered IDs will be displayed in 5 digits.
When the memory is full, please refer to “Event Memory Setup”. (see page 61)
1.
2.
3.
•
M
1.
2.
3.
M
3.TWO MEN MODE
J
NOT USE
3.TWO MEN MODE
J
USE
6.EVENT COUNT
00014
