English - 14
Universal Remote Setup
This TV has a universal remote control feature that lets you control cable boxes, Blu-
ray players, home theatres, and other third-party external devices connected to the TV
using the TV's remote control.
5 cm
Plug the cable into the TV IR connector and then point the transmitter at the other
end of the cable towards the external device's remote panel receiver. However, there
can' be any obstacles between the IR extension cable and the external device. The
presence of an obstacle will interfere with the transmission of the remote control signal.
Add the External Device
1.
Turn on the external device you wish to set up universal remote function for and
then press
SOURCE
to bring up the
Source
screen.
2.
Select
Universal remote setup
from the top of the screen. This initiates the
universal remote setup process.
3.
Follow the on-screen instruction and set up the universal remote control. If it does
not work, set up the remote control by entering the model number manually.
SETUP
The initial setup dialog appears when the TV is first activated. Follow the on-screen
instructions to finish the initial setup process, including menu language choice, channel
scan, network connection, and more. At each step, either make a choice or skip the
step. Users can manually perform this process at a later time under the Screen Menu >
System
>
Setup
menu.
✎
If you connect any device to
HDMI1
before starting the installation, the
Channel
Source
will be changed to
Set-top box
automatically.
✎
If you do not want to select
Set-top box
, please select
Aerial
.
Password Change
Screen Menu >
System
>
Change PIN
Change the TV's password.
1.
Run
Change PIN
and then enter the current password in the password field. The
default password is “0-0-0-0” (France: “1-1-1-1”).
2.
Enter a new password and then enter it again to confirm it. The password change
is complete.
✎
If you forget the PIN code, press the buttons in the following sequence which
resets the PIN to “0-0-0-0” (France: “1-1-1-1”):
For Standard Remote Control
: In Standby mode:
MUTE
→
8
→
2
→
4
→
POWER
(On)
For Smart Touch Control
: When the TV turns on:
MUTE
→
Volume up
→
RETURN
→
Volume down
→
RETURN
→
Volume up
→
RETURN
[UHDS9-XN-ZF]BN68-05272E-03L04.indb 14
2013-10-31 1:55:49
