Samsung SU3330, User Manual

8_

operating the cleaner

Operating the cleaner

operating the cleaner

 _9

HEIGHT ADjUSTMENT 

The Powerfoot/Rotating Floor Brush can be adjusted to clean several floor surfaces.

1. Turn Height Adjustment Knob to desired setting.

    Bare floor Setting

    – For bare floors.

    Medium Settings

    – For short and medium pile carpets.

    Highest Setting

    – For plush pile carpet

Note :     

For optimal cleaning performance, adjust to the lowest practical setting. 

             If your cleaner is difficult to push, adjust to the next higher setting.
              Always ensure that the correct height setting is used for your flooring type as 

damage may occur if the height setting is not changed to reflect your flooring type.

pOwER SwITcH

 The Power Switch is located on the side of the vacuum.

Push the rocker switch "ON" to vacuum, and "OFF" 

when cleaning is complete.

1. Upright

    – For storage and above floor cleaning with tools.

2. Normal Cleaning

   –  Press handle release pedal once. Position used for 

most household floor cleaning tasks.

3. Low Cleaning

    –  With the vacuum in normal cleaning position, press 

handle release pedal again. Use for reaching under 

low furniture such as tables, chairs or beds.

HANDLE pOSITIONS

Press the handle release pedal, located on the lower left side of the vacuum, with 

your foot to place your vacuum  into one of three cleaning positions.

TRANSpORTING cLEANER

1.  To move your cleaner from room 

    to room, put the Handle in the 

    upright  position, tilt the cleaner 

    back on its rear wheels and push

    forward.
2.  The cleaner can also be moved 

    by using the Carrying Handle located 

    on the top of the Dust Bin.

Carrying 

Handle