02 OPERA
TING THE CLEANER
operating the cleaner
_7
operating the cleaner
POWER CORD
POWER SWITCH
1. The power switch is located on the top of the
vacuum body. Push the rocker switch “ON” to
vacuum, and “OFF” when cleaning is complete.
1. PULLING OUT
The power cord is long enough to be drawn out for convenience.
2. REWINDING
Upon finishing cleaning, disconnect the plug from the electrical outlet and press the cord
rewind button lightly with your toe. And then place the plug into the guide hole on the body
as shown.
3. CORD CLIP
Place the power cord into the cord clip on the body as shown. This
helps keep the power cord out from under the vacuum cleaner
nozzle.
4. PLUG IN
Plug the polarized power cord into a 240 Volt outlet located near the
floor.
When removing the plug from the electrical outlet, grasp the plug, not the
cord.
Do not pull the power cord beyond the yellow indicator
and take care when rewinding the power cord to prevent
the plug hitting the vacuum or the user.
ON
OFF
Yellow Indication
CAUTION
CAUTION
