29
GB
Selecting the COLOR SYSTEM Mode
Intelligent Picture Control
28
GB
Intelligent picture control feature allows you to adjust the
sharpness of the image automatically according to your own
preferences.
1
During playback, press the IPC button on the remote control.
Result:
◆
The
P I C T U R E
appears on the display.
➢
When intelligent picture control mode is
O N
, the sharpness
of the image is adjusted automatically.
2
To adjust the sharpness manually, press the
button to turn the
IPC mode
O F F
.
3
Press the
or
button until the
P I C T U R E
is displayed according
to your preferences.
➢
If you do not press a button within six seconds, the
P I C T U R E
MENU disappears automatically.
4
On completion, press the IPC button again.
* *
P I C T U R E
* *
IPC : ON
SOFTEN SHARPEN
- - - - - - - -
*
- - - - -
O N / O F F :
* *
P I C T U R E
* *
IPC : OFF
SOFTEN SHARPEN
- - - - - - - -
*
- - - - -
O N / O F F :
1
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢
◆
When playing back a cassette, the standard is
automatically selected by the VCR.
◆
When you playback an NTSC-recorded tape on this VCR
make a setting on the color system according to your TV.
If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43, NT3.58
compatible), set NT4.43 or NT3.58 and you can record
NT4.43 or NT3.58 respectively.
❈
CASE1
Press the COLOR SYSTEM button in the front panel or the S Y S T E M
button on the remote control to select color system mode.
Each time you press this button, color mode is changed.
Result: COLOR SYSTEM is changed. (NT3.58
➝
NT4.43
➝
NTPB or
AUTO
➝
PAL
➝
SECAM
➝
MESECAM
➝
B/W)
The system standard is automatically selected by the VCR.
It depend on the field frequency of input source, On-air or input terminal.
Result: 50Hz AUTO
➝
PAL
➝
SECAM
➝
MESECAM
➝
B/W
60HZ NT3.58
➝
NT4.43
➝
NTPB sequence
❈
CASE2
1
Press the MENU button on the remote control.
Result:
The MAIN menu is displayed.
2
Press the corresponding
or
button to select the
USER SET
option.
3
Press the OK button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
button, until the cursor is placed
in front of the
COLOR SYSTEM
option.
5
Press the
button to select NT3.58
➝
NT4.43
➝
NTPB or
AUTO
➝
PAL
➝
SECAM
➝
MESECAM
➝
B/W.
AUTO
When playing back a cassette, the system standard is
automatically selected by the VCR.
B/W
Black and White
6
On completion, press the MENU button twice to exit the menu.
O K
E N D:
M E N U
USER SET
O S D
: O N
TAPE SELECT
:E 1 8 0 /
T 1 2 0
COLOR SYSTEM
: A U T O
I P C
: O N
N I C A M
: O N
E N D:
M E N U
00872A SV-2000M/xev-GB3 9/8/56 12:12 PM Page 28
