GB
24
Recording a Programme with Automatic Stop
3
RE
C
AU
DIO
SP
EE
D
OK
DISPLAY
V LOCK
RST F.ADV
PUT INDEX
TRK PROG
EC
MENU
AU
DIO
EAT
6
4
5
4
LENGTH 2:30
SET LENGTH :
PRESS
REC
This function enables you to record up to nine hours (LP) of
programmes.
Your VCR stops automatically after the requested length of time.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The VCR is switched on automatically.
4
Select:
◆
The station to be recorded using the PROG (
"
or
❷
) buttons
or
◆
The AV1 or AV2
★
(SV-633B/SV-630B/SV-6303B only)
source using the INPUT button for a satellite tuner or external
video source
Result:
The channel number is displayed and the programme
can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 21).
6
Hold the REC button (
●
) down for a while to start recording.
Result:
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 35).
7
Press the REC button (
●
) several times to increase the recording
time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours (LP)
Result:
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.
8
If you wish to cancel the recording before the end, press
STANDBY/ON.
☛
If the end of the tape is reached while recording:
◆
The recording stops
◆
The VCR automatically turns off
