GB
25
Using the G-CODE Feature
★
(SV-640B/SV-245B Only)
SPEED DUB TV/VCR TIMER
1
G-CODE
CODE ---------
CODE:
0-9
CORRECT:
➛
END:
MENU
** TIMER METHOD **
STANDARD
G-CODE
#
❷
❿
END:
MENU
PROG
1/JAN MON 21:28
PR DAY START
→
STOP
L1 MO 1 12:00
→
12:50SP
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
#
❷
➛❿
DELETE:
CLR/RST
MENU
★
(SV-640B)
PROG
1/JAN MON 21:28
PR DAY START
→
STOP
L1 MO 1 12:00
→
12:50
-- ---- --:--
→
--:--
-- ---- --:--
→
--:--
-- ---- --:--
→
--:--
-- ---- --:--
→
--:--
-- ---- --:--
→
--:--
#
❷
➛❿
DELETE:
CLR/RST
MENU
★
(SV-245B)
Before presetting your VCR:
◆
Switch on both the television and your VCR
◆
Check that the date and time are correct
◆
Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the TIMER button.
Result:
The
TIMER METHOD
is displayed.
2
Press the corresponding
#
or
❷
buttons, until the
G-CODE
option
is selected.
3
Press the
❿!
button to select
G-CODE
.
Result:
A message is displayed to allow you to enter the
G-CODE code.
☛
If all six programmes have been set, the message
TIMER
IS FULL
is displayed. Refer to page 28 if you wish to
cancel a preset recording.
4
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢
If you wish to correct the G-CODE code that you are
entering:
◆
Press the
➛
button until the digit to be corrected is
cleared
◆
Enter the correct digit
5
Press the MENU button.
Result:
The information concerning the programme is displayed.
☛
When using the G-CODE function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
#
or
❷
buttons. Refer to the following page if:
◆
The programme number or times flash
◆
You wish to modify the programme
6
If the programme and times are correct, press the MENU button.
7
Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer.
Result:
The Timer indicator (
) is displayed. (SV-640B)
The REC indicator dim the light. (SV-245B)
☛
If no cassette has been inserted when you press
VCR STANDBY/ON (STANDBY/ON) the Timer indicator
flashes. If the safety tab on the cassette has been broken,
the cassette is ejected. Insert the appropriate cassette.
8
Refer to page 28 if you wish to:
◆
Check that your VCR has been programmed correctly
◆
Cancel a preset recording
☛
The numbers next to each TV programme listing are
G-CODE code numbers, which allow you to programme
your videorecorder instantly with the remote control. Tap
in the G-CODE code for the programme you wish to
record.
™ G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is
manufactured under licence from Gemstar Development Corporation.
V
IPC
+
NICAM
01327A SV-641B/XSA-GB3 7/5/02 11:53 AM Page 25
