Samsung SV-251B Instruction Manual Download

Page: 11 / 27

You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.

Press the MENU button on the remote control.

Press the corresponding

❷

➛

❿

buttons to select the

INSTALLATION

option.

Press the OK button to select this option.
Result:

The

INSTALLATION

menu is displayed.

Press the

❷

buttons to select

MANUAL SET UP

option.

And then press the

❿

button to select this option.

Result:

The

TV STATION TABLE

menu is displayed.

Press the corresponding

❷

buttons, until the required preset

TV programme is selected.
Result:

The selected station is displayed at the same time on
the television screen.

To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)

Press the

❷

buttons to select required position. And then

press OK again to swap the position.

You can modify this station by repeating the same procedure from
Step

5 onwards.

On completion, press the MENU button three times to exit the
menu.

Changing the Preset Station Table

INSTALLATION

PROG OPTIONS INSTALL

CLOCK BONUS LANG

INSTALL

❷!!

➛❿!!

END:

MENU

INSTALL

AUTO SET UP

MANUAL SET UP

VCR OUTPUT CH :CH60

❷

❿

END:

MENU

** TV STATION TABLE **

NAME

027

CAEB

---

----

---

----

---

----

---

----

❷

SWAPPING:

MENU

** TV STATION TABLE **

NAME

---

----

---

----

027

CAEB

---

----

---

----

❷

SWAPPING:

MENU

If you have stored a TV station:

◆

That you do not require

◆

At the wrong programme position

you can cancel it.

Press the MENU button on the remote control.

Press the corresponding

❷

➛

❿

buttons to select the

INSTALLATION

option.

Press the OK button to select this option.
Result:

The

INSTALLATION

menu is displayed.

Press the corresponding

❷

buttons, until the

MANUAL SET

option is selected.

Press the

❿

button to select this option.

Result:

The

TV STATION TABLE

menu is displayed.

Press the corresponding

❷

buttons, until the required preset

TV station (PR) is selected.

Press the CLR/RST button.

Repeat the same procedure from Step

6 onwards until all the

required stations have been cleared.

On completion, press the MENU button three times to exit the
menu.

Clearing a Preset Station

INSTALLATION

PROG OPTIONS INSTALL

CLOCK BONUS LANG

INSTALL

❷!!

➛❿!!

END:

MENU

INSTALL

AUTO SET UP

MANUAL SET UP

VCR OUTPUT CH :CH60

❷

❿

END:

MENU

** TV STATION TABLE **

NAME

027

CAEB

---

----

---

----

---

----

---

----

❷

❿

SWAPPING:

DELETE:

CLR/RST MENU

01823B SV-657B/XEU-GB2 8/28/02 11:16 AM Page 20

Summary of Contents for SV-251B




























Search results

Summary of Contents for SV-251B

Reviews:

Related manuals for SV-251B

Brands by name

Popular brands

Samsung SV-251B, Instruction Manual

Search results

Summary of Contents for SV-251B

Reviews:

Related manuals for SV-251B

Brands by name

Popular brands