Samsung SV-251B Instruction Manual Download

Page: 20 / 27

AV-Link Function of this VCR

★

(SV-657B Only)

If your TV has “Easy Link / nexTViewLink / AV-Link” function, the VCR can automatically store stations
memorized in the TV in the same channel position as those of the TV.
Using a SCART cable (21 pins), a mutual control is available with the TV, VCR, SAT receiver, etc.

●

The VCR automatically stores all your current TV stations in the VCR in the same position order as the
TV channels. (“TV CH DOWNLOAD”)

●

Even if the TV is in standby mode, the TV automatically turns on and displays the video picture when
you start playback on the VCR.

●

The VCR automatically selects the same picture as you are watching on the TV, and record it. (“TV
PICTURE”)

●

The VCR takes in the data and turns to timer standby mode, after a program data reserved is
transferred to the VCR by a TV using such as a EPG (Electronic Program Guide). In this case, the TV’s
and the VCR’s channel position must be set to the same TV station. The position could be stored from
1 to 80. Also the VCR’s clock must be set.

Connection

Connect your EasyLink / nexTViewLink / AV-Link TV to the AV1 (EURO AV) socket on the rear of the VCR using the
SCART cable. Refer to your TV’s manual additionally.

AV2 (SATELLITE) IN

AV1 (EURO AV)

R/D

L/G

AUDIO

OUT/SORTIE

IN/OUT (SCART) SCART Cable

AUDIO/VIDEO

AERIAL INPUT

AERIAL OUTPUT

AERIAL IN

When connecting another VCR supporting EasyLink / nexTViewLink / AV-Link functions

The “nexTViewLink” system can connect 2 VCRs (VCR1 and VCR2) at the same time. This VCR is adjusted to
“VCR1”, so it should be connected to VCR2.

VCR2

this VCR

IN/OUT(SCART)

SCART cable

VCR1

SCART cable

SATELLITE IN

AERIAL INPUT

AERIAL OUTPUT

AERIAL INPUT

AV2 (SATELLITE) IN

AV1 (EURO AV)

R/D

L/G

AUDIO

OUT/SORTIE

AERIAL IN

IN/OUT(SCART)

AUDIO/VIDEO

Satellite antenna

- Connection to your EasyLink / nexTViewLink / AV-Link TV and a satellite receiver

- Connection to your EasyLink / nexTViewLink / AV-Link TV

21 pins SCART cable

VI EXTEND

★

(SV-657B/SV-655B/SV-255B Only)

To prevent delays or over-runs the VCR has a function called
Videoplus EXTEND allowing you to extend the recording time by
up to 60 minutes.

➢

Only use if PDC is not available or set to OFF.

Press the MENU button on the remote control.

Press the corresponding

❷

➛

❿

buttons to select the

EASY OPERATION

option.

Press the OK button to select this option.
Result:

The

EASY OPERATION

menu is displayed.

Press the corresponding

❷

buttons, until the

VIDEOPLUS EXTEND

option is selected.

Press

➛

❿

buttons to set the Videoplus EXTEND time by

increments of 10 minutes.

To turn off, press

➛

❿

buttons repeatedly until

OFF

shows.

The tape counter:

◆

Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)

◆

Is reset when a cassette is inserted in the VCR

◆

Allows you to find the beginning of a sequence easily

☛

If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.

Insert a cassette in your VCR.

To set the tape counter to zero at the beginning of a sequence:

◆

Press DISP./

or DISPLAY twice to display the counter

◆

Press CLR/RST when you want to set the tape counter to zero

When you are ready,

◆

Start playback or Recording.

◆

Press the

■

button.

◆

To fast-forward or rewind to the sequence at which the
counter was set to zero, press

➛➛

❿❿

➢

Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 17).

Press DISP./

or DISPLAY:

◆

Once to display the current function, programme
number, recording speed, date, time and counter

◆

Twice to display the counter only

◆

Three times to display the time remaining on the
cassette

◆

Four times to clear the display

Using the Tape Counter

EASY OPERATION

PROG OPTIONS INSTALL

CLOCK BONUS LANG

❷!!

➛❿!!

END:

MENU

PDC/VPS DEFAULT

:OFF

VIDEOPLUS EXTEND :OFF

AUTO POWER OFF

:OFF

REPEAT PLAY

:OFF

NO. OF

INTERVAL REPEAT : 5

❷

❿

END:

MENU

BONUS

0:00:00

CLR/RST F.ADV INDEX

TV VCR INPUT

REPEAT

VOL PROG/TRK

AUDIO

REC

DISP./

SELECT

-/--

CLR/RST F.ADV INDEX

A.TRK IPC INPUT

REPEAT

TRK PROG

UDIO

REC

DISPLAY

★

(SV-657B/SV-655B)

★

(SV-651B/SV-651I/

SV-255B/SV-251B/
SV-251I)

01823B SV-657B/XEU-GB4 8/28/02 11:20 AM Page 38

Summary of Contents for SV-251B




























Search results

Summary of Contents for SV-251B

Reviews:

Related manuals for SV-251B

Brands by name

Popular brands

Samsung SV-251B, Instruction Manual

Search results

Summary of Contents for SV-251B

Reviews:

Related manuals for SV-251B

Brands by name

Popular brands