ENG-21
ENG-20
Your VCR can automatically play Wide Screen format
prerecorded tapes. It can also record Wide Screen
format programmes received from sources such as a
satellite receiver.
☛
Connect equipment compatible with Wide
Screen to the VCR using the 21 pin SCART cable.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the USER SET option.
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
FORMAT 16:9 option is selected.
5
Press the
❿
button to select AUTO
➝
ON
➝
OFF.
AUTO Set when you use a wide TV. The VCR
automatically detects if programmes being
played back or recorded are in normal or
Wide Screen format.
ON
The VCR always plays back and records in
16:9 Wide Screen format. Set if the VCR
cannot detect Wide Screen TVprogrammes
with “AUTO” set.
OFF
Set if you do not use a Wide Screen TV.
6
On completion, press MENU twice to exit the menu.
Format 16:9 (Wide Screen)
★
(SV-675B/SV-671B/SV-671I Only)
OPTIONS
OSD
TAPE SEL
COLOUR S
FORMAT 1
NICAM
IPC
❷
❿
Selecting the Colour Mode
Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
➢
◆
When playing back a cassette, the standard is
automatically selected by the VCR.
◆
When you playback an NTSC-recorded tape
on this VCR make a setting on the colour
system according to your TV.
If your TV is a PAL system only TV, set
NTPB. If your TV is Multi System TV (NTSC
4.43 compatible), set NT4.43 and you can
record NT4.43.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the USER SET option.
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
COLOUR SYSTEM option is selected.
5
Press the
❿
button to select AUTO
➝
PAL
➝
B/W.
AUTO When playing back a cassette, the system
standard is automatically selected by
the VCR.
B/W Black and White
6
On completion, press MENU twice to exit the menu.
1
During playback, press the IPC button.
Result: The PICTURE menu is displayed.
2
Press the
❷
button to turn the IPC (Intelligent
Picture Control) option ON and OFF
➢
When Intelligent Picture Control mode is ON,
the sharpness of the image is adjusted
automatically.
3
To adjust the sharpness manually, select Intelligent
Picture Control mode OFF.
◆
The horizontal picture adjusting appears.
4
Press the
➛
or
❿
buttons until the picture is
displayed according to your preferences.
➢
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
5
On completion, press the IPC button again.
The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
1
During playback, press the MENU button on the
remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the USER SET option.
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
IPC option is selected.
5
Press the
❿
button to select the IPC (intelligent
picture control) option.
➢
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
6
To adjust the sharpness manually, press the
❷
button to turn the IPC mode OFF.
7
Press the
➛
or
❿
buttons until the picture is
displayed according to your preferences.
➢
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
8
On completion, press the MENU button again.
Intelligent Picture Control
Intelligent Picture Control
★
(SV-671B/SV-671I/SV-275B/
SV-271B/SV-271I Only)
** PICTURE **
IPC : OFF
SOFTEN SHARPEN
--------*-----
➛❿
ON/OFF:
❷
02119G SV-675B/XEU-eng 12/12/03 6:09 PM Page 20
