ENG-17
ENG-16
Modifying VI Programming
★
(SV-675B/SV-275B Only)
If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so
before you press MENU a second time to confirm.
If you wish to...
Then...
Select an input source other
◆
Press the
➛
or
❿
buttons, until the PR selection flashes.
than the tuner (AV1, AV2 or
◆
Press the INPUT button one or more times to change the
AUX
★
(SV-675B only))
input source selection.
Result:
The programme number is replaced by:
• The AV1, AV2 or AUX
★
(SV-675B only)
source using the INPUT button for a
satellite tuner or external video source
➢
The input source must be selected before
changing any other value.
Record a programme every day
◆
Press the
➛
or
❿
buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time
◆
Press the
or
❷
buttons, until the DLY (Daily) value is
displayed.
Record a programme every week
◆
Press the
➛
or
❿
buttons, until the DAY selection flashes.
on the same day and at the same time
◆
Press the
or
❷
buttons, until the W- (Week) value is
displayed, followed by the required day.
Example:
W-SA (Weekly Saturday)
Extend the recording time
◆
Press the
➛
or
❿
buttons, until the STOP selection flashes.
◆
Press the
or
❷
buttons to increase or decrease the stop
time.
Select the recording speed
◆
Press the
➛
or
❿
buttons, until the recording speed selection
flashes.
◆
Press the
or
❷
buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select) : see page 18
• SP (Standard Play)
• LP (Long Play)
Select the PDC recording
◆
Press the
➛
or
❿
buttons, until the V/P selection flashes.
◆
Press the
or
❷
buttons until the “P” indication is
displayed.
☛
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC ON
(by selecting “ON” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
Before presetting your VCR:
◆
Switch on both the television and your VCR
◆
Check that the date and time are correct
◆
Insert the cassette on which the programme is
to be recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the TIMER button.
Result: The TIMER METHOD is displayed.
2
Press the corresponding
or
❷
buttons, until the
VIDEOPLUS option is selected.
3
Press the
❿
button to select VIDEOPLUS.
Result: A message is displayed to allow you to
enter the VI code.
☛
If all six programmes have been set, the
message TIMER IS FULL is displayed. Refer
to page 19 if you wish to cancel a preset
recording.
4
Press the numeric buttons to enter the code
opposite the programme that you wish to record in
your television magazine.
➢
If you wish to correct the VI code
that you are entering:
◆
Press the
➛
button until the digit to be
corrected is cleared
◆
Enter the correct digit
5
Press the MENU button.
Result: The information concerning the programme
is displayed.
☛
When using the VI function for the first
time with stored stations, the programme number
flashes. This one time, you must enter the station
number manually by pressing the
or
❷
buttons. Refer to the following page if:
◆
The programme number or times flash
◆
You wish to modify the programme
6
If the programme and times are correct, press the
MENU button.
7
Press the VCR STANDBY/ON (STANDBY/ON)
button to activate the timer.
8
Refer to page 19 if you wish to:
◆
Check that your VCR has been programmed
correctly
◆
Cancel a preset recording
☛
The numbers next to each TV programme listing
are VI code numbers, which allow
you to programme your videorecorder instantly
with the remote control. Tap in the VI
code for the programme you wish to record.
™VI is a trademark of Gemstar Development Corporation.
The VI system is manufactured under licence from Gemstar
Development Corporation.
Using the VI Feature
★
(SV-675B/SV-275B Only)
** TIMER METHOD **
STANDARD
VIDEOPLUS
❷
❿
END:
MENU
VIDEOPLUS
CODE ---------
CODE:
0-9
CORRECT:
➛
END:
MENU
PROG
❷
➛❿
DELETE:
CLR/RST
MENU
1/JAN THU 21:28
PR DAY START
→
STOP V/P
1 MO 1 12:00
→
12:50SP P
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
02119G SV-675B/XEU-eng 12/12/03 6:09 PM Page 16
