Samsung SV-271F Instruction Manual Download

Page: 20 / 32

ENG-20

The Intelligent Picture Control Feature allows
you to adjust the sharpness of the image
automatically, according to your own
preferences.

During playback, press the IPC button on the
remote control.

Press the

❷

button to turn the IPC (intelligent

picture control) option

and

OFF

➢

When intelligent picture control mode is

the sharpness of the image is adjusted
automatically.

To adjust the sharpness manually, select
intelligent picture control mode

OFF

◆

The horizontal picture adjusting appears.

Press the

➛

❿

buttons until the picture is

displayed according to your preferences.

➢

If you do not press a button within ten
seconds, the

PICTURE

menu disappears

automatically.

On completion, press the IPC button again.

The Intelligent Picture Control Feature allows
you to adjust the sharpness of the image
automatically, according to your own
preferences.

During playback, press the MENU button on the
remote control.
Result: The programming menu is displayed.

Press the corresponding ,

❷

➛

❿

buttons to

select the

USER SET

option.

Press the OK button to select this option.
Result: The

USER SET

menu is displayed.

Press the corresponding

❷

buttons, until the

IPC

option is selected.

Press the

❿

button to select the IPC (intelligent

picture control) option.

➢

When intelligent picture control mode is

the sharpness of the image is adjusted
automatically.

To adjust the sharpness manually, press the

❷

button to turn the IPC mode

OFF

Press the

➛

❿

buttons until the picture is

displayed according to your preferences.

➢

If you do not press a button within ten
seconds, the

PICTURE

menu disappears

automatically.

On completion, press the MENU button again.

Intelligent Picture Control

★

(SV-671F/SV-471F/SV-275F/SV-271F Only)

02119C SV-675F/XEB-ENG 3/15/04 10:46 AM Page 20

Summary of Contents for SV-271F

































Search results

Summary of Contents for SV-271F

Reviews:

Related manuals for SV-271F

Brands by name

Popular brands

Samsung SV-271F, Instruction Manual

Search results

Summary of Contents for SV-271F

Reviews:

Related manuals for SV-271F

Brands by name

Popular brands