ENG-14
7
If you wish to cancel the auto scanning before the
end, press the MENU button three times to exit the
menu.
➢
◆
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception and
delete the ones no longer required (see page 16).
☛
You do not need to preset the stations if you have
already set them automatically (see Plug & Auto
Set Up on page 11).
Your VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆
Plug & Auto Set up (see page 11)
◆
Automatically
◆
Manually (see page 15)
You can store up to 50 stations.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
AUTO SET UP option is selected.
Press the
❿
button to select this option.
5
Press the corresponding
or
❷
buttons, to
select the your SYSTEM SELECT.
Press the
❿
button to select this option.
6
Press OK to start the auto scanning.
Result:
◆
The PLEASE WAIT indication flashes on
the television screen.
◆
The first frequency band is scanned and
the first station found is displayed and
stored.
◆
The VCR then searches for the second
station and so on.
◆
When the automatic scanning procedure
has finished, the VCR switches
automatically to programme 1.
➢
The number of stations automatically stored by the
VCR depends on the number of stations that it has
found.
Presetting the Stations Automatically
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM
:I
VCR OUTPUT CH
:CH36
❷
❿
END:
MENU
02132A SV-677I/XFA-eng 3/4/04 1:52 PM Page 14
