Samsung SV-272I, Instruction Manual

ENG-16

You can rearrange the Station Table and give different

programme numbers to the stations listed according to

your own preferences.

1

Press the MENU button on the remote control.
Result: The programming menu is displayed.

2

Press the corresponding 

,

❷

or 

➛

, 

❿

buttons to 

select the INSTALLATION option. 

3

Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.

4

Press the corresponding 

or 

❷

buttons, until the

MANUAL SET UP option is selected. And then 
press the 

❿

button to select this option.

Result: The TV STATION TABLE menu is displayed.

5

Press the corresponding 

or 

❷

buttons, until the

required preset TV programme is selected.
Result: The selected station is displayed at the 

same time on the television screen.

6

To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3) 

7

Press the 

or 

❷

buttons to select required

position. And then press OK again to swap the
position. 

8

You can modify this station by repeating the same
procedure from Step 5 onwards.

9

On completion, press the MENU button three times
to exit the menu.

If you have stored a TV station:

◆

That you do not require

◆

At the wrong programme position

you can cancel it.

1

Press the MENU button on the remote control.
Result: The programming menu is displayed.

2

Press the corresponding 

,

❷

or 

➛

, 

❿

buttons to 

select the INSTALLATION option. 

3

Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.

4

Press the corresponding 

or 

❷

buttons, until the

MANUAL SET UP option is selected.

5

Press the 

❿

button to select this option.

Result: The TV STATION TABLE menu is 

displayed.

6

Press the corresponding 

or 

❷

buttons, until the

required preset TV station (PR) is selected.

7

Press the CLR/RST button.

8

Repeat the same procedure from Step 6 onwards 
until all the required stations have been cleared.

9

On completion, press the MENU button three times 
to exit the menu. 

Clearing a Preset Station

Changing the Preset Station Table

❷

❿

SWAPPING: 

OK

DELETE: 

CLR/RST

MENU

** TV STATION TABLE **

PR

CH SYSTEM 

1

005

I

2

---

I

3

---

I

4

---

I

5

---

I

❷

❿

SWAPPING: 

OK

DELETE: 

CLR/RST

MENU

** TV STATION TABLE **

PR

CH SYSTEM 

1

---

I

2

---

I

3

005

I

4

---

I

5

---

I

02132A SV-677I/XFA-eng  3/4/04 1:52 PM  Page 16