Samsung SV-4000 Instruction Manual Download

Page: 12 / 31

Your VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find
the pictures. Also, you can change the VCR output
channel to adjust the frequency in which information is
displayed on the screen.

Press MENU on the remote control.
Result: The programming menu is displayed.

Press the corresponding

❷

➛

❿

buttons to

select the INSTALLATION option.

You must choose the sound mode (G or K) according to
the TV set connected to your VCR.

Press MENU on the remote control.
Result: The programming menu is displayed.

Press the corresponding

❷

➛

❿

buttons to

select the LANGUAGE SET option.

Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.

Press the corresponding

❷

buttons, until

the TV SYSTEM option is selected.

Press the

❿

button to select G or K.

On completion, press MENU twice to exit the
menu.

Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.

Press the corresponding

❷

buttons, until the

VCR OUTPUT CH option is selected.

Select the required output channel by pressing the

➛

❿

buttons.

On completion, press MENU twice to exit the menu.
Then tune your television again (see page 10).

ENG-12

❷

➛❿

END:

MENU

PROG OPTIONS INSTALL

CLOCK BONUS LANG

INSTALL

INSTALLATION

Setting the VCR Output
Channel

INSTALL

AUTO SET UP
MANUAL SET UP
TV SYSTEM :G

VCR OUTPUT CH :CH36

❷

❿

END:

MENU

INSTALL

AUTO SET UP
MANUAL SET UP

TV SYSTEM :G

VCR OUTPUT CH :CH36

❷

❿

END:

MENU

You can change the language in which information is
displayed on the screen.

Press MENU on the remote control.
Result: The programming menu is displayed.

Press the corresponding

❷

➛

❿

buttons to

select the LANGUAGE SET option.

Press the OK button to select this option.
Result: The LANGUAGE SET menu is displayed.

Select the required language by pressing the

❷

buttons.

Press OK to store the language selected.

Press MENU to exit the menu.
Result: From now on, all the on-screen information

will be displayed in the language selected.

❷

➛❿

END:

MENU

PROG OPTIONS INSTALL

CLOCK BONUS LANG

LANG

LANGUAGE SET

Choosing Your Language

Selecting the RF OUT Sound
Mode

02125A SV-4000/HACO-eng 3/19/04 4:04 PM Page 12

Summary of Contents for SV-4000
































Search results

Summary of Contents for SV-4000

Reviews:

Related manuals for SV-4000

Brands by name

Popular brands

Samsung SV-4000, Instruction Manual

Search results

Summary of Contents for SV-4000

Reviews:

Related manuals for SV-4000

Brands by name

Popular brands